Do I need Left or Right side?
Part can be found as reference #3 in illustration
Diesel Particulate Filter Assembly - Mopar (68035061AB)
CATALYTIC
Diesel Particulate Filter Assembly - Mopar (68035061AB)
The Diesel Particulate Filter Assembly - Mopar (68035061AB) is a Genuine OEM emissions control component designed to capture and reduce soot particles produced during diesel engine operation on compatible Mopar vehicles. As a key part of the exhaust aftertreatment system, this assembly helps the vehicle meet emissions standards while supporting proper exhaust flow and overall diesel system performance.
Manufactured by Mopar, the official parts division for Chrysler, Dodge, Jeep, and Ram vehicles, this diesel particulate filter assembly is built to the same standards as the original factory-installed unit. Its OEM design helps ensure proper fitment within the exhaust system, correct compatibility with related sensors and emissions components, and factory-correct performance for the intended diesel application.
The DPF works by trapping particulate matter generated during combustion and then reducing buildup through the vehicle’s regeneration process. Because it operates as part of a calibrated emissions system, proper construction and flow characteristics are essential to maintaining engine efficiency, exhaust system balance, and emissions compliance. This assembly is designed to integrate with the vehicle’s original exhaust and aftertreatment configuration without compromising system operation.
Over time, diesel particulate filter assemblies can become restricted, damaged, cracked, contaminated, or unable to regenerate effectively, especially in vehicles exposed to repeated short-trip driving, excessive soot loading, or related emissions system faults. A failing or overloaded DPF can lead to warning lights, reduced engine performance, excessive backpressure, limp mode conditions, or emissions-related diagnostic trouble codes. Replacing the original with the Mopar 68035061AB helps restore proper exhaust aftertreatment performance and system function.
For professional technicians, using a genuine Mopar DPF assembly helps ensure compatibility with factory emissions calibrations, mounting points, and service procedures. For DIY vehicle owners with advanced diesel repair experience, this OEM assembly offers a more dependable solution than non-OEM alternatives that may not meet original fitment or emissions performance standards.
Key Features and Benefits
• Genuine Mopar OEM diesel particulate filter assembly for exhaust emissions control
• Helps capture soot particles and support proper diesel aftertreatment system operation
• Designed to match factory exhaust routing, fitment, and emissions system requirements
• Supports proper regeneration, exhaust flow, and emissions compliance
• Ideal replacement for restricted, damaged, or failed original DPF assemblies
• Helps restore dependable diesel exhaust system performance and drivability
If you are repairing an emissions system issue or replacing a restricted diesel exhaust component, the Diesel Particulate Filter Assembly - Mopar (68035061AB) provides the OEM-quality fit, performance, and reliability trusted by professional technicians and experienced DIY vehicle owners.
- Min. 12 Months
- Safe, Secure Checkout
Customers Also Purchased
Product Details
Description
CATALYTIC
Diesel Particulate Filter Assembly - Mopar (68035061AB)
The Diesel Particulate Filter Assembly - Mopar (68035061AB) is a Genuine OEM emissions control component designed to capture and reduce soot particles produced during diesel engine operation on compatible Mopar vehicles. As a key part of the exhaust aftertreatment system, this assembly helps the vehicle meet emissions standards while supporting proper exhaust flow and overall diesel system performance.
Manufactured by Mopar, the official parts division for Chrysler, Dodge, Jeep, and Ram vehicles, this diesel particulate filter assembly is built to the same standards as the original factory-installed unit. Its OEM design helps ensure proper fitment within the exhaust system, correct compatibility with related sensors and emissions components, and factory-correct performance for the intended diesel application.
The DPF works by trapping particulate matter generated during combustion and then reducing buildup through the vehicle’s regeneration process. Because it operates as part of a calibrated emissions system, proper construction and flow characteristics are essential to maintaining engine efficiency, exhaust system balance, and emissions compliance. This assembly is designed to integrate with the vehicle’s original exhaust and aftertreatment configuration without compromising system operation.
Over time, diesel particulate filter assemblies can become restricted, damaged, cracked, contaminated, or unable to regenerate effectively, especially in vehicles exposed to repeated short-trip driving, excessive soot loading, or related emissions system faults. A failing or overloaded DPF can lead to warning lights, reduced engine performance, excessive backpressure, limp mode conditions, or emissions-related diagnostic trouble codes. Replacing the original with the Mopar 68035061AB helps restore proper exhaust aftertreatment performance and system function.
For professional technicians, using a genuine Mopar DPF assembly helps ensure compatibility with factory emissions calibrations, mounting points, and service procedures. For DIY vehicle owners with advanced diesel repair experience, this OEM assembly offers a more dependable solution than non-OEM alternatives that may not meet original fitment or emissions performance standards.
Key Features and Benefits
• Genuine Mopar OEM diesel particulate filter assembly for exhaust emissions control
• Helps capture soot particles and support proper diesel aftertreatment system operation
• Designed to match factory exhaust routing, fitment, and emissions system requirements
• Supports proper regeneration, exhaust flow, and emissions compliance
• Ideal replacement for restricted, damaged, or failed original DPF assemblies
• Helps restore dependable diesel exhaust system performance and drivability
If you are repairing an emissions system issue or replacing a restricted diesel exhaust component, the Diesel Particulate Filter Assembly - Mopar (68035061AB) provides the OEM-quality fit, performance, and reliability trusted by professional technicians and experienced DIY vehicle owners.
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
Shipping Policy
Shipping Time
Please allow 24-48 hours for us to process your order. Most in stock orders will arrive within 7-10 business days within the contiguous U.S. If we are out of stock of an item ordered we will order it from our distribution center warehouse which can add an additional 7-10 days to your delivery date. Parts that are on an excessive backorder of greater than 30 days will be noted on the product page itself. A product that is available for sale does not reflect our actual inventory as it’s constantly changing.
When a package is in transit, shipping times DO NOT include weekends. All orders are shipped complete.
Dynamic Shipping Cost Calculation
The shipping costs for orders are dynamically calculated when customers go through our checkout process. The calculation for shipping costs factor in the dimensions and weight of the products being purchased as well as the shipping destination and other shipping company-specific delivery options presented to the user when checking out.
UPS is our carrier of choice.
Refused Shipments
Freight charges incurred by the sender while attempting to deliver merchandise which is refused will be billed to the customer.
Core Charges
Customers are responsible for return shipping of a core if a core is required. Cores need to be sent back within their original packaging in order to be eligible for refund. Cores should be sent back to the address found on our contact us page. The package label should include “Core (your order number”
Canada & International Shipping
UPS is our carrier of choice. Shipping costs do not include duties, taxes or brokerage fees which will be due at the time of delivery. This amount is in addition to the shipping charges paid on your order.
Return Policy
- Contact us to arrange for any returns.
- A copy of the invoice will need to be included with the return.
- Parts must be resaleable and in the original packaging.
- We cannot take back used parts.
- We cannot take back installed or tried parts.
- Electrical parts are not returnable.
- We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria.
- Return request need to be within 30 days of receipt.
Vintage Parts
All sales are final for Vintage Parts, No returns can be accepted.
Cancellation Policy
- An order or a portion of an order may be cancelled up until the time it is shipped and no longer in our possession.
- If the cancelled part was special ordered from the manufacturer a return fee of 15% may apply.
Restocking Fees and Other Charges
Nope, Not here! We do not charge any re-stocking fees.
Mopar Original Parts is a factory-authorized source for genuine OEM Mopar parts and accessories covering Jeep, Ram, Dodge, and Chrysler. Whether you are replacing a Wrangler suspension component, a Ram 1500 brake assembly, or a Grand Cherokee sensor, every part we ship comes from dealership inventory with the manufacturer's warranty intact and is priced below MSRP. Use the vehicle selector to filter by year, model, and trim so you order the correct part the first time. Not sure which part number you need? Call us now and a parts specialist will verify fitment by VIN.