Do I need Left or Right side?
Double Ended Stud - Mopar (6512787AA)
M8x1.25xm6x1.00x83.00. Side. Use For 06/04/2018 And After. Exhaust Manifold To Cylinder Head.
Double Ended Stud - Mopar (6512787AA)
The Double Ended Stud - Mopar (6512787AA) is a Genuine OEM threaded fastening component designed to provide a secure mounting point for various vehicle assemblies on compatible Mopar vehicles. This type of stud is commonly used in applications where a fixed threaded anchor is required to attach brackets, panels, shields, supports, or other mounted components while maintaining proper alignment and installation stability.
Manufactured by Mopar, the official parts division for Chrysler, Dodge, Jeep, and Ram vehicles, this double ended stud is built to the same exact specifications as the original hardware installed at the factory. Its OEM design ensures the proper thread dimensions, length, and engagement needed for the intended mounting location, helping preserve original fitment and assembly integrity during repairs or reinstallation.
Constructed from durable automotive-grade metal, the stud is engineered to withstand clamping force, vibration, and repeated service exposure under normal operating conditions. With threaded ends designed to interface with corresponding mounting surfaces and retaining hardware, it provides a reliable connection point that helps keep attached components firmly secured and correctly positioned.
Studs like this are often removed or replaced during repairs involving mounted brackets, trim assemblies, underbody panels, structural supports, or engine bay components. Over time, original studs may become bent, stripped, corroded, or damaged due to age, environmental exposure, or improper removal. Replacing worn or damaged hardware with the Mopar 6512787AA helps restore factory-correct fastening performance and reduces the risk of poor fitment or insecure attachment.
For professional technicians, using genuine Mopar threaded hardware helps ensure compatibility with original mounting points and associated factory fasteners. For DIY vehicle owners, choosing the correct OEM double ended stud provides a dependable replacement solution that helps avoid thread mismatch and installation issues often associated with generic substitutes.
Key Features and Benefits
• Genuine Mopar OEM double ended stud for secure threaded mounting
• Provides a fixed mounting point for brackets, panels, and attached components
• Manufactured to factory specifications for proper thread engagement and fit
• Constructed from durable automotive-grade metal for long-term reliability
• Direct replacement for bent, stripped, corroded, or damaged original hardware
• Supports secure installation and helps maintain proper component alignment
If you are replacing damaged mounting hardware or restoring a factory-correct attachment point, the Double Ended Stud - Mopar (6512787AA) delivers the OEM-quality fit, strength, and fastening performance trusted by professional technicians and experienced DIY vehicle owners.
- Min. 12 Months
- Safe, Secure Checkout
Product Details
Description
M8x1.25xm6x1.00x83.00. Side. Use For 06/04/2018 And After. Exhaust Manifold To Cylinder Head.
Double Ended Stud - Mopar (6512787AA)
The Double Ended Stud - Mopar (6512787AA) is a Genuine OEM threaded fastening component designed to provide a secure mounting point for various vehicle assemblies on compatible Mopar vehicles. This type of stud is commonly used in applications where a fixed threaded anchor is required to attach brackets, panels, shields, supports, or other mounted components while maintaining proper alignment and installation stability.
Manufactured by Mopar, the official parts division for Chrysler, Dodge, Jeep, and Ram vehicles, this double ended stud is built to the same exact specifications as the original hardware installed at the factory. Its OEM design ensures the proper thread dimensions, length, and engagement needed for the intended mounting location, helping preserve original fitment and assembly integrity during repairs or reinstallation.
Constructed from durable automotive-grade metal, the stud is engineered to withstand clamping force, vibration, and repeated service exposure under normal operating conditions. With threaded ends designed to interface with corresponding mounting surfaces and retaining hardware, it provides a reliable connection point that helps keep attached components firmly secured and correctly positioned.
Studs like this are often removed or replaced during repairs involving mounted brackets, trim assemblies, underbody panels, structural supports, or engine bay components. Over time, original studs may become bent, stripped, corroded, or damaged due to age, environmental exposure, or improper removal. Replacing worn or damaged hardware with the Mopar 6512787AA helps restore factory-correct fastening performance and reduces the risk of poor fitment or insecure attachment.
For professional technicians, using genuine Mopar threaded hardware helps ensure compatibility with original mounting points and associated factory fasteners. For DIY vehicle owners, choosing the correct OEM double ended stud provides a dependable replacement solution that helps avoid thread mismatch and installation issues often associated with generic substitutes.
Key Features and Benefits
• Genuine Mopar OEM double ended stud for secure threaded mounting
• Provides a fixed mounting point for brackets, panels, and attached components
• Manufactured to factory specifications for proper thread engagement and fit
• Constructed from durable automotive-grade metal for long-term reliability
• Direct replacement for bent, stripped, corroded, or damaged original hardware
• Supports secure installation and helps maintain proper component alignment
If you are replacing damaged mounting hardware or restoring a factory-correct attachment point, the Double Ended Stud - Mopar (6512787AA) delivers the OEM-quality fit, strength, and fastening performance trusted by professional technicians and experienced DIY vehicle owners.
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
Shipping Policy
Shipping Time
Please allow 24-48 hours for us to process your order. Most in stock orders will arrive within 7-10 business days within the contiguous U.S. If we are out of stock of an item ordered we will order it from our distribution center warehouse which can add an additional 7-10 days to your delivery date. Parts that are on an excessive backorder of greater than 30 days will be noted on the product page itself. A product that is available for sale does not reflect our actual inventory as it’s constantly changing.
When a package is in transit, shipping times DO NOT include weekends. All orders are shipped complete.
Dynamic Shipping Cost Calculation
The shipping costs for orders are dynamically calculated when customers go through our checkout process. The calculation for shipping costs factor in the dimensions and weight of the products being purchased as well as the shipping destination and other shipping company-specific delivery options presented to the user when checking out.
UPS is our carrier of choice.
Refused Shipments
Freight charges incurred by the sender while attempting to deliver merchandise which is refused will be billed to the customer.
Core Charges
Customers are responsible for return shipping of a core if a core is required. Cores need to be sent back within their original packaging in order to be eligible for refund. Cores should be sent back to the address found on our contact us page. The package label should include “Core (your order number”
Canada & International Shipping
UPS is our carrier of choice. Shipping costs do not include duties, taxes or brokerage fees which will be due at the time of delivery. This amount is in addition to the shipping charges paid on your order.
Return Policy
- Contact us to arrange for any returns.
- A copy of the invoice will need to be included with the return.
- Parts must be resaleable and in the original packaging.
- We cannot take back used parts.
- We cannot take back installed or tried parts.
- Electrical parts are not returnable.
- We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria.
- Return request need to be within 30 days of receipt.
Vintage Parts
All sales are final for Vintage Parts, No returns can be accepted.
Cancellation Policy
- An order or a portion of an order may be cancelled up until the time it is shipped and no longer in our possession.
- If the cancelled part was special ordered from the manufacturer a return fee of 15% may apply.
Restocking Fees and Other Charges
Nope, Not here! We do not charge any re-stocking fees.
Mopar Original Parts is a factory-authorized source for genuine OEM Mopar parts and accessories covering Jeep, Ram, Dodge, and Chrysler. Whether you are replacing a Wrangler suspension component, a Ram 1500 brake assembly, or a Grand Cherokee sensor, every part we ship comes from dealership inventory with the manufacturer's warranty intact and is priced below MSRP. Use the vehicle selector to filter by year, model, and trim so you order the correct part the first time. Not sure which part number you need? Call us now and a parts specialist will verify fitment by VIN.