Fuel Pressure Sensor - Mopar (68002436AD)
Injector plumbing.
Fuel Pressure Sensor - Mopar (68002436AD)
The Fuel Pressure Sensor - Mopar (68002436AD) is a Genuine OEM engine management component designed to monitor fuel system pressure on compatible Mopar vehicles. This sensor plays a critical role in helping the engine control system accurately measure fuel pressure conditions so the vehicle can maintain proper fuel delivery, performance, and emissions control under a variety of operating conditions.
Manufactured by Mopar, the official parts division for Chrysler, Dodge, Jeep, and Ram vehicles, this fuel pressure sensor is engineered to the same exact specifications as the original factory-installed component. Its OEM design ensures correct fitment, electrical communication, and calibration characteristics for the intended fuel system application, helping preserve the accuracy and reliability required for proper engine operation.
Typically constructed with a sealed sensor housing, precision internal sensing elements, and factory-style electrical connections, the fuel pressure sensor is built to perform in the demanding environment of the engine and fuel system. It is designed to continuously relay pressure data to the vehicle’s control module, allowing fuel system adjustments to be made as needed for efficient combustion, drivability, and system protection.
A failing or inaccurate fuel pressure sensor can contribute to a variety of performance issues, including hard starting, poor acceleration, rough running, reduced fuel efficiency, check engine lights, or fuel system diagnostic trouble codes. Sensor degradation may result from heat exposure, internal electrical faults, contamination, or general wear over time. Replacing a faulty original unit with the Mopar 68002436AD helps restore proper pressure monitoring and supports correct fuel system performance.
For professional technicians, using genuine Mopar engine management components helps ensure compatibility with factory fuel system calibrations, wiring, and control strategies. For DIY vehicle owners with the appropriate service knowledge, selecting the correct OEM sensor helps reduce the risk of inaccurate readings, fitment issues, or drivability concerns often associated with lower-quality replacements.
Key Features and Benefits
• Genuine Mopar OEM fuel pressure sensor for accurate fuel system monitoring
• Helps the engine control system regulate proper fuel delivery and performance
• Designed to factory specifications for fit, calibration, and electrical compatibility
• Constructed with durable sealed sensor components for reliable operation
• Direct replacement for faulty, inaccurate, or failed original pressure sensors
• Supports drivability, fuel efficiency, and proper engine system operation
If you are diagnosing a fuel system issue or replacing a malfunctioning sensor, the Fuel Pressure Sensor - Mopar (68002436AD) delivers the OEM-quality fit, signal accuracy, and reliability trusted by professional technicians and experienced DIY vehicle owners.
- Min. 12 Months
- Safe, Secure Checkout
Product Details
Description
Injector plumbing.
Fuel Pressure Sensor - Mopar (68002436AD)
The Fuel Pressure Sensor - Mopar (68002436AD) is a Genuine OEM engine management component designed to monitor fuel system pressure on compatible Mopar vehicles. This sensor plays a critical role in helping the engine control system accurately measure fuel pressure conditions so the vehicle can maintain proper fuel delivery, performance, and emissions control under a variety of operating conditions.
Manufactured by Mopar, the official parts division for Chrysler, Dodge, Jeep, and Ram vehicles, this fuel pressure sensor is engineered to the same exact specifications as the original factory-installed component. Its OEM design ensures correct fitment, electrical communication, and calibration characteristics for the intended fuel system application, helping preserve the accuracy and reliability required for proper engine operation.
Typically constructed with a sealed sensor housing, precision internal sensing elements, and factory-style electrical connections, the fuel pressure sensor is built to perform in the demanding environment of the engine and fuel system. It is designed to continuously relay pressure data to the vehicle’s control module, allowing fuel system adjustments to be made as needed for efficient combustion, drivability, and system protection.
A failing or inaccurate fuel pressure sensor can contribute to a variety of performance issues, including hard starting, poor acceleration, rough running, reduced fuel efficiency, check engine lights, or fuel system diagnostic trouble codes. Sensor degradation may result from heat exposure, internal electrical faults, contamination, or general wear over time. Replacing a faulty original unit with the Mopar 68002436AD helps restore proper pressure monitoring and supports correct fuel system performance.
For professional technicians, using genuine Mopar engine management components helps ensure compatibility with factory fuel system calibrations, wiring, and control strategies. For DIY vehicle owners with the appropriate service knowledge, selecting the correct OEM sensor helps reduce the risk of inaccurate readings, fitment issues, or drivability concerns often associated with lower-quality replacements.
Key Features and Benefits
• Genuine Mopar OEM fuel pressure sensor for accurate fuel system monitoring
• Helps the engine control system regulate proper fuel delivery and performance
• Designed to factory specifications for fit, calibration, and electrical compatibility
• Constructed with durable sealed sensor components for reliable operation
• Direct replacement for faulty, inaccurate, or failed original pressure sensors
• Supports drivability, fuel efficiency, and proper engine system operation
If you are diagnosing a fuel system issue or replacing a malfunctioning sensor, the Fuel Pressure Sensor - Mopar (68002436AD) delivers the OEM-quality fit, signal accuracy, and reliability trusted by professional technicians and experienced DIY vehicle owners.
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
Shipping Policy
Shipping Time
Please allow 24-48 hours for us to process your order. Most in stock orders will arrive within 7-10 business days within the contiguous U.S. If we are out of stock of an item ordered we will order it from our distribution center warehouse which can add an additional 7-10 days to your delivery date. Parts that are on an excessive backorder of greater than 30 days will be noted on the product page itself. A product that is available for sale does not reflect our actual inventory as it’s constantly changing.
When a package is in transit, shipping times DO NOT include weekends. All orders are shipped complete.
Dynamic Shipping Cost Calculation
The shipping costs for orders are dynamically calculated when customers go through our checkout process. The calculation for shipping costs factor in the dimensions and weight of the products being purchased as well as the shipping destination and other shipping company-specific delivery options presented to the user when checking out.
UPS is our carrier of choice.
Refused Shipments
Freight charges incurred by the sender while attempting to deliver merchandise which is refused will be billed to the customer.
Core Charges
Customers are responsible for return shipping of a core if a core is required. Cores need to be sent back within their original packaging in order to be eligible for refund. Cores should be sent back to the address found on our contact us page. The package label should include “Core (your order number”
Canada & International Shipping
UPS is our carrier of choice. Shipping costs do not include duties, taxes or brokerage fees which will be due at the time of delivery. This amount is in addition to the shipping charges paid on your order.
Return Policy
- Contact us to arrange for any returns.
- A copy of the invoice will need to be included with the return.
- Parts must be resaleable and in the original packaging.
- We cannot take back used parts.
- We cannot take back installed or tried parts.
- Electrical parts are not returnable.
- We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria.
- Return request need to be within 30 days of receipt.
Vintage Parts
All sales are final for Vintage Parts, No returns can be accepted.
Cancellation Policy
- An order or a portion of an order may be cancelled up until the time it is shipped and no longer in our possession.
- If the cancelled part was special ordered from the manufacturer a return fee of 15% may apply.
Restocking Fees and Other Charges
Nope, Not here! We do not charge any re-stocking fees.
Mopar Original Parts is a factory-authorized source for genuine OEM Mopar parts and accessories covering Jeep, Ram, Dodge, and Chrysler. Whether you are replacing a Wrangler suspension component, a Ram 1500 brake assembly, or a Grand Cherokee sensor, every part we ship comes from dealership inventory with the manufacturer's warranty intact and is priced below MSRP. Use the vehicle selector to filter by year, model, and trim so you order the correct part the first time. Not sure which part number you need? Call us now and a parts specialist will verify fitment by VIN.
Do I need Left or Right side?
